4 * 360° Laser Lines with Touch Control Panel
4 X 360° WITH TOP & FLOOR LINE LASER: This laser tool provides four 360 planes of laser light. The top 360° horizontal line can be used for ceiling installation. The 360° floor horizontal line is for tiling installation. With the lifting base, the 360° floor laser can raise from the surface to project over and travel past uneven surfaces or obstructions . Two 360° vertical lines cross at 90°angles makes user quickly visualize and finish square layout.
360° Adjustable Mini Tripod
It is not only suitable for tile ceilings, but also has an adjustable lifting platform, from 0.9 inches to 3.4 inches, which can be used for walls, floors and ceilings. One button can easily project the lines together or independently (cross lines, vertical lines and horizontal 360 degrees)
Adjustable Lift Platform
The lifting base can adjust the height of the laser line above the ground and meet your different needs. You can be raised up to a max height of 3½ feet and lets you securely position the tool on the floor or a table.
Wide range of applications
The horizontal/vertical lines can be selected individually or simultaneously, depending on the field application. You can switch via remote control or touch button. Ideal for auxiliary tile fixing, wall decoration, floor tile fixing, stair handrails, etc.
Multifctional laser tool
The four 360° laser planes can be selected individually by separate H and V button on the keypad. With smart pendulum, the laser tool self levels and indicates out-of-level condition while pendulum unlocked. The line laser will beep when out of self-leveling range ±3°. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.
Comes with 2 high power Batteries
The laser level meter uses a rechargeable large-capacity lithium-ion battery. Even if the battery is removed, it can be directly inserted into the level gauge and used on the job site. Use the battery charger to charge the battery independently.
Specific parameters of CONENTOOL 4D Cross Line Laser Level
Laser Class: Class 2 (IEC/EN60825-1/2014), <1mW power output
Material: ABS plastic shell
Laser type: 515nm green
Laser class: Class 2 (＜10mW)
Laser harness: 16 lines 4D green light (360°x4); 4, 8, 12, 16 lines adjustable
Working distance: 20m ~ 30m
Horizontal/vertical accuracy: ±2.2mm/10m
Automatic leveling range: ±3°
Working time: 6~8 hours
Working temperature: -10°C~45°C
Protection level: IP54
Slash function: Yes
Working environment: indoor and outdoor
How to use ?
Step 1: Fix the metal gasket in the position you want
Step 2: Install the adapter on the laser window and the bracket; then directly connect the bracket base to the metal plate through magnetism
Knob A: Control sliding forward or backward
Knob B: Control the vertical tilt of the device by controlling the bracket. Use in an inclined state
Knob C: Rotate the arc of the control device to the left or right.
"H" is Horizontal switch button.
"V" is Vertical switch button.
1x Wall Mount
1x Wall Iron Sheet
1x Lifting Frame
1x Remote Control
1x Fine-tuning Base
1x Cloth Bag